Items (0)
£0.00

DYNATEX 240V Electric Turbine Paint Sprayer HVLP Spray Gun 500ml Pot Emulsion & Gloss 321260

  code:FS/321230
  • Offers Available
  • Spend £160 for 5% off (use code 5%OFF at the shopping basket)
£31.99 (Delivery from £5.99)
RRP: £98.50 You Save: £66.51 (68%)
Item out of Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout
240V Electric Turbine Paint Sprayer HVLP Spray Gun 500ml Pot Emulsion & Gloss 321260
 
This electric paint sprayer is ideal for industrial work, fence and shed painting, marine and automotive
applications using a variety of different coatings with the exception of textured wall coverings or coatings.
 
WARNING
 
Do not use with material with flash point of less than 55C
 
Specification
  • Fluid Tip 1.8mm (plus additional 2.6mm)
  • Cup Size 800ml
  • Power 230-240V, 550W, 50Hz
  • Max Viscosity 80din/sec
  • Flow Rate 800ml/min
  • Cable Length 2m
  • Weight 1.98kg
  • Sound Pressure Level LpA 84.27dBA (K=3dBA)
  • Sound Power Level LwA 95.27dBA (K=3dBA)
  • Vibration Level <2.5m/s2 (K=1.5m/s2)
 
Operating Instructions

Preparation
To obtain the best results, it is important that you prepare the surface to be sprayed and thin the paint to the correct
viscosity before you start work. Always ensure that the surface to be sprayed is free from dust, dirt, grease
and other foreign bodies. Always mask the areas around the areas to be sprayed using good quality masking
tape. The paint to be sprayed should be suited to the task and compatible with your spraygun. There should be
no lumps or other particles. Make sure that you have a properly working strainer. Many substances can be
sprayed with this gun but it is important that you check with your paint supplier before purchasing your paint. It is
very important that you check the panel for signs of silicone contamination before starting work.
 
Thinning
Most paints are supplied ready for the type of application and applying technique but may have to be thinned for
use with your spraygun. Always follow the paint manufactures advice on thinning paint. The viscosity cup supplied
will help you determine the correct viscosity of the paint to be used. To measure the viscosity if the paint fill
the cup to the brim and measure the length of time it take to empty. The table below shows the recommended
times for different materials. Please note that this is intended as a guide only and you should advice from your
paint supplier.
Plastic & Latex 24-28secs Water based Paint 20-25secs
Primers 24-28secs Varnishes 20-25secs
Oil based paints 18-22secs Enamel paints 18-22secs
Aluminium paints 22-25secs Car underseal 25-35secs
Wood sealers 28-35secs Wood preservatives Not required
Wood stains Not required
If the paint takes longer than the recommended time to empty, further thinning is required. Mix a small quantity of
the appropriate thinner and use the viscosity cup again until the required figure is achieved. Some paints contain
lumps and particles and these should be strained before use.
 
Spraying
Fill the paint cup with the appropriately thinned paint and screw onto the gun. Connect the air hose and then plug
in the mains supply and switch on. It is recommended that you use a test card or scrap panel to make sure that
  • Great value for money
  • Supplied brand new
  • Suitable for many applications
  • Available from stock for immediate dispatch
  • All prices include VAT. Invoice provided
Shipping Details:
Shipping to UK mainland is from £1.99. Postage is determined by weight and value for insurance. This excludes premium shipping zones.
 
Next day delivery £6.99 UK Mainland (Excludes exclusion zones)
 
If your delivery address falls within the shipping exclusion zones, you will either be shown a charge for the delivery on your order, or we may contact you and request additional payment for postage should you have completed the checkout. If you do not wish to proceed with the order, please contact us by email within 5 hours of placing your order.
 
Delivery & Dispatch Promise
We will make every effort to deliver your order within 3 to 5 working days.
 
We guarantee to dispatch your order if received before 3.00 pm the same day
 
Next Day Service
This service only applies to orders placed and paid in full before 2.30 pm and do not fall into the additional postage zone table.
 
The service does not include weekends or Bank Holidays. All next day orders placed on Friday before 2.30 pm will arrive on Monday and not over the weekend. Next day deliveries excludes weekends.
 
Damages & Loss:
All damaged goods and losses must be reported by email with 48 hours. After this period has lapsed, we will not accept responsibility for damaged goods. Please check your order. This will then be avoided.
 
Failure to do this will invalidate any claims made.
 
Returns
Returning an item you have purchased by mistake or still under warranty:
 
We will endeavour to provide as much information within the content of our product pages to allow you to make an informed decision on your purchase. However, should you require to return any product, we will allow you to do so within 14 days of the day after receipt. If you do this, please enclose a copy of your invoice with the goods. You will have to arrange the return of the goods yourself and track them using a reputable carrier. We ask that you do everything possible to ensure the goods are returned to us in good condition and if possible with their original packaging. We will refund the total cost of the goods, minus a restocking charge when we receive the goods back in a resalable condition. We reserve the right to charge a restocking charge.
 
Returning an item that is faulty:
If we have supplied an item that is faulty or goes faulty in the first 7 days of receipt we will arrange the uplift of the goods (Please put a copy your invoice with the goods.). Should we ( and sometimes the manufacturer ) upon receipt of said items be satisfied as to the alleged defects we will either replace the goods or arrange a refund of the full value of the goods and any carriage costs incurred.
 
Returning an item that we have supplied incorrectly:
If we send you the wrong item, please email us, all good recieved in error will be collected and replaced at our cost.
 
None returnable goods:
We will not accept returns of none stock goods, Consumables, Gasses, Oils, Lubricants, Perishables, or specially ordered items. This is simply because most of our suppliers will not accept these items back. When possible, with agreement from our suppliers to accept such returned goods, a handling charge at their discretion will apply (To be advised). Vehicles sold on my shop are for personal sale, and we do not accept returns. Any vehicle sold is purchased sold as seen.
 
Warranty:
We offer a return to base policy only. Being a distributor for many products, in certain cases (depending on product manufacturer) some will allow a collection process at no cost to you. This is subject to the warranty claim being accepted.
 
If you receive faulty goods please email us with your invoice number and some information regarding the fault. We will process your claim, and if the goods are found to be faulty, a replacement will be supplied free of charge. Should however the returned item be damaged or abused, no replacement or credit will be given. Return charge of your goods will apply. It is the responsibility of the customers to return goods to our choice of destination within UK mainland should they be damaged on arrival and not reported within 48 hours of receipt or under warranty or no longer required.
 
General Goods Information:
All original manufacturers numbers used in our products listed on eBay are for reference only and in some cases are not intended to be sold as original equipment parts.  We offer a fair trade policy on our carriage and returns. Please contact us if you feel you need to discuss any matters relating to the above. We are here to help.

Safe and Secure Shopping Guaranteed – here at A 1 Plant Sales Ltd we’re committed to ensuring your personal information is secure,  we use the web’s leading, most secure, online ordering system to protect your payments and personal information.  


Payment Methods  - We accept all major credit and debit cards. All online payments are taken through our Sagepay - or PayPal payment service, both are widely used and offer buyer protection on all transactions.  


VeriSign - the Web's No. 1 Security Provider - All payment and personal information is protected by our globally trusted VeriSign certificate guarantee.

 

Shop safely and in confidence with A 1 Plant Sales Ltd (ONE SAFE SOURCE)

DYNATEX
Sage pay logo